Baileigh RDB-050 Manual Rotary Draw Tube Bender with Stand and Handle, 2-1/2″ Tube Capacity

0




Buy Now with Best Price



Baileigh manually operated tube bender designed as an affordable bender that has enough capacity. This is revolutionary in design, function and capacity. It is extremely powerful and can bend up to 2-1/2-inches outside diameter mild steel with a wall thickness of 0.120-inches and 2-inches outside diameter, chromalloy with a wall thickness of 0.120-inches. It has three selectable bending speeds. The proper speed for each application depends on the material type, outside diameter and wall thickness. Speed one (4 degrees per pull) has the most torque and would be used for bending 2-inches outside diameter chromalloy or 2-1/2-inches outside diameter mild steel. Speed two produces 8 degrees (for intermediate materials), while speed three produces 12 degrees (for lighter gauge materials) with each pull. Also, it can bend in one shot without having to stop and reset the machine. The manual tube bender has no disassembly or assembly needed to produce a bend. Simply walk up to the and put your tubing into the hook arm insert and begin bending. When the bend is complete, return the machine to the home position and pull your bend out, or position it for the next bend. The tube bender can bend up to 200 degrees and an anti spring back mechanism holds each bend in place as the operator ratchets forward. All pivot points utilize aluminum bronze bushings and thrust washers, for long life. The hook arm has quick release inserts to assist when changing over the machine to a different size of tubing. A complete changeover should take no more than one minute. It comes complete with the stand, bend handle and degree dial. Just add tooling and ready to bend tube. Minimum CLR: 3-inches; minimum outside diameter: 3/4-inches; mild steel solid rod: 1-inches; mild steel round tube wall: 2.5-inches (0.120); stainless steel round tube wall: 2-inches (0.120); chromalloy round tube wall: 2-inches (0.120); aluminum round tube wall: 2.5-inches (0.120); maximum clr: 7-inches; power: manual.
Manually operated
Manually operated
Patented design
Manually operated
Manually operated
Patented design
No repining required
Manually operated
Manually operated
Patented design
Manually operated
Manually operated
Patented design
No repining required
Quick change hook sleeves
Manually operated
Manually operated
Patented design
Manually operated
Manually operated
Patented design
No repining required
Manually operated
Manually operated
Patented design
Manually operated
Manually operated
Patented design
No repining required
Quick change hook sleeves
Four bending speeds