Simadre 5200dx 110v/220v 50a Plasma Cutter 200a Tig Arc Mma Welder

0




Buy Now with Best Price



Post gas/air time: to adjust the time for air/gas blow out of torch after welding 1. Compact and portable 2. Strong and very reliable ready for Industrial/Commercial and nay other application 3. Stable current and does not change with the length of the arc 4. Current can be adjusted easily 5. Flexible TIG torch come with long and short back cap for welding in tight places 6. 60% Duty cycle for TIG and ARC (MMA) welding 7. Plasma Cutter - arc is compressed by the rapid-circulating air and its temperature reaches 10,000 - 15,000 C in the state of ionization, turning into a strong plasma arc 8. 60% Duty cycle for plasma cutting (cutting thickness 1-16mm) 9. This machine cuts 12mm plate very quickly and very neatly with little need for preparation before welding 10. It is a 50amp Plasma Cutter! 11. Suitable for all kinds of basic and acid electrodes 12. Powerful machine can push 4mm I.H electrode. 13. The exchange cycle of the assembled machinery can be as high as 85% 14. Connect to your own argon regulator (not provided) or your compressor (not provided) 15. Lead lengths: Earth and MMA (ARC) 4m, TIG and Plasma Torch 5m and have rubber heat resistant sleeves 16. Fan cooled, automatic voltage and thermostatic protection 17. Advance MOS/IGBT inverter technology, save energy Input voltage - AC 110/220±15% 50/60Hz Input Power Capacitance - 7.1 kva No-load loss(W) - 40 Duty cycle (%) - 60 Power factor - 0.93 Efficiency (%) - 85 Insulation class - B Protection class - IP21 Input current(A) TIG - 21 MMA - 32 CUT - 28.6 Rated output current TIG - 200A MMA - 200A CUT - 50A Current range TIG - 15-200 MMA - 15-200 CUT - 20-50 No -load voltage(V) TIG - 62 MMA - 62 CUT - 250 Cut thickness(mm)- 1-16 Arc-leading TIG - HF vibrate MMA - Touch CUT - HF vibrate You shall provide 60~70 psi air supply, 110v or 220v power plug for plasma cutting and argon tank for tig welding.
This machine can cut the same thinkcness under 110V or 220V - great enhancement
This machine can cut the same thinkcness under 110V or 220V - great enhancement
Brand new panel design for better controlling and operation
This machine can cut the same thinkcness under 110V or 220V - great enhancement
This machine can cut the same thinkcness under 110V or 220V - great enhancement
Brand new panel design for better controlling and operation
Fre-flow time: to adjust the time for air/gas blow out of torch before welding
This machine can cut the same thinkcness under 110V or 220V - great enhancement
This machine can cut the same thinkcness under 110V or 220V - great enhancement
Brand new panel design for better controlling and operation
This machine can cut the same thinkcness under 110V or 220V - great enhancement
This machine can cut the same thinkcness under 110V or 220V - great enhancement
Brand new panel design for better controlling and operation
Fre-flow time: to adjust the time for air/gas blow out of torch before welding
Current: for welding/cutting current
This machine can cut the same thinkcness under 110V or 220V - great enhancement
This machine can cut the same thinkcness under 110V or 220V - great enhancement
Brand new panel design for better controlling and operation
This machine can cut the same thinkcness under 110V or 220V - great enhancement
This machine can cut the same thinkcness under 110V or 220V - great enhancement
Brand new panel design for better controlling and operation
Fre-flow time: to adjust the time for air/gas blow out of torch before welding
This machine can cut the same thinkcness under 110V or 220V - great enhancement
This machine can cut the same thinkcness under 110V or 220V - great enhancement
Brand new panel design for better controlling and operation
This machine can cut the same thinkcness under 110V or 220V - great enhancement
This machine can cut the same thinkcness under 110V or 220V - great enhancement
Brand new panel design for better controlling and operation
Fre-flow time: to adjust the time for air/gas blow out of torch before welding
Current: for welding/cutting current
Down slope: would help to weld stainless steel